Blog

/

Use case

Blog

/

/

Amazon Black Friday Ads Strategy 2026: What to Do Before, During and After BFCM

Use case

Use cases

Amazon Black Friday Ads Strategy 2026 (BFCM Plan)

Rakshita Soni

Amazon Black Friday Ads Strategy 2026 (BFCM Plan)

Key Takeaways

  • Split BFCM into three phases: Before (Nov 1 to 20), During (Nov 21 to 30) and After (Dec 1 to 24). Around 80% of the work sits in the first phase.

  • Pick one goal per product line, sales or profitability, and write it down before you touch a campaign.

  • Launch BFCM campaigns by November 1 so they build history before traffic peaks.

  • Check stock for the whole season, not just the event. Use the stock formula below to find out how many units you need to last until December 24.

  • During the event, keep your top 5 campaigns in budget, turn dayparting off when sales is the goal, and watch BSR, impression share and total sales.

  • After Cyber Monday, keep budgets up, retarget everyone who shopped Nov 1 to Dec 1, and ask every buyer for a review.

Black Friday lands on November 27, 2026, and Cyber Monday on November 30. Amazon’s Black Friday week is expected to start around November 20. For the brands that win, those dates are the finish line, meaning their work began nearly a month ago, on November 1.

This Amazon Black Friday ads strategy covers what to set up before the event, how to protect your budget during it, and how to keep selling until December 24. These strategies are based on how we have helped brands succeed on BFCM.

Amazon Black Friday Ads Strategy 2026: The BFCM Calendar for Amazon Sellers

The three BFCM phases and where the work sits.

Figure 1: The three BFCM phases and where the work sits.


Phase

Dates

Your focus

Tools you will use

Before

Nov 1 to 20

Goals, retail readiness, campaign setup, audits

Reporting by ASIN, budget rules, DSP

During

Nov 21 to 30

Budgets, high intent shoppers, monitoring

Budget rules, dayparting, AMC

After

Dec 1 to 24

Momentum, retargeting, reviews

AMC, Sponsored Display, DSP, dayparting

The biggest mistake on this calendar is a common one. Many sellers raise bids only 3 to 5 days before Black Friday. By then, there is no time for campaigns to build the history Amazon uses to decide which ads to show.

How to Prepare for Black Friday on Amazon (Nov 1 to 20)

This is where 80% of the work happens.

Step 1: Choose your Black Friday ads goal, sales or profitability

Every decision your team makes during the event flows from this one. So make it per product line, and share it in writing.

Figure 2: Sales goal versus profitability goal.



Sales goal

Profitability goal

Best for

Products where rank and new customers pay off through December

Low margin products or lines with tight stock

What you accept

A higher ACOS during the event

Lower volume in exchange for margin

Where spend goes

Ranking campaigns come first

Only proven converters: your best hours, audiences and keywords

Dayparting

Off

On, aggressive in peak hours only

Watch for mixed messages. “Focus on sales, but keep ACOS under 30%” reads to your team or agency as an ACOS target, and at BFCM traffic levels that usually means giving up sales.

If profitability is your goal, consider winning on price instead of bids. A lower price is a fixed cost you control. A bid war keeps raising your spend until you rank, and that can push ACOS past your target.

Step 2: Make your products retail ready for BFCM

Ads cannot sell what is not ready. Check three things before traffic arrives.

Area

What to check

Why it matters

Inventory

FBA stock for your hero ASINs that lasts until December 24 (plan for 2 to 3 months of cover)

Running out mid event wastes the ad spend that built your rank

Pricing

Deals, coupons or Prime exclusive discounts scheduled early, and checked against your top competitors

Discounts around 20% are common during BFCM, so a smaller deal can get lost

Listings

Titles, bullets, A+ content and holiday images updated now

A failed listing change mid sale costs you your peak days


How many units do you need until December 24?

“2 to 3 months of cover” is easy to say and hard to check. This formula turns it into a number per hero ASIN.

Units needed = (Days before the event × Baseline daily units) + (Event days × Baseline × Event uplift) + (Days after × Baseline × After uplift)

Illustration, with a baseline of 20 units a day, a 3x uplift for the 10 event days and a 1.5x uplift for the 24 days after:


Phase

Days

Daily units

Units needed

Before (Nov 1 to 20)

20

20

400

During (Nov 21 to 30)

10

60

600

After (Dec 1 to 24)

24

30

720

Total

54


1,720


Units needed to last until December 24, illustrative.

Figure 3: Units needed to last until December 24, illustrative.


In this example, 1,720 units is about 86 days of normal sales, which is why a “30 days of stock” rule fails at BFCM. Replace the baseline and uplift with your own numbers from last year. If you cannot cover the total, set an automation to pause ads when inventory drops below a set number of days, such as 15.

Step 3: Amazon PPC for Black Friday, set up campaigns early

Amazon decides how often to show your ad partly on its expected click through rate. A new campaign has no history, so it starts slowly. A campaign that has run for three weeks has momentum by the time shoppers arrive.

  • Launch BFCM campaigns by November 1. If you paused last year’s BFCM campaigns, restart them on November 1 at a lower budget rather than a few days before the event.

  • Build ranking campaigns for your top 5 keywords. Use one keyword per campaign, exact match, and push for top of search, so you can control each one.

  • Raise budgets week by week through November. Your campaigns should stay in budget as traffic climbs.

Sponsored Brands campaigns also go through moderation, which can take several rounds.

Step 4: Audit your Amazon ads account every week

Set aside time every Monday to check four things:

  • Which of your top 20 ASINs will not have enough stock to last until December 24?

  • Which search terms spent more than $50 in the last 30 days with no sales?

  • Which campaigns ran out of budget in the last 14 days, and at what time?

  • Where do you rank organically for your top 5 keywords today?

Report at the ASIN level and the keyword level, not just by campaign. That is how you see which products are actually winning. AI assistants such as Claude, connected to your ads and retail data through an MCP connection, can answer these questions in plain English and run them on a schedule.

Step 5: Amazon DSP for Black Friday, lead in with audiences

If you run Amazon DSP, start about a month before the event, so shoppers know your brand when they are ready to buy. (Amazon renamed its programmatic buying DVA on September 29, 2026. We say DSP here because most brands still search for it. Our Amazon DSP guide covers the basics.) Five audiences to lead with:

  1. In market shoppers for your category (active in the last 30 days)

  2. Shoppers who viewed your products but did not buy

  3. Shoppers who viewed competitor products

  4. Past purchasers, for repeat and replenishment buys

  5. Lifestyle or interest audiences that match your buyers

In market shoppers are a strong first audience even if you start DSP close to the event. Get your creatives approved before November 20.

Amazon Cyber Monday Ads and BFCM Amazon Ads During the Event (Nov 21 to 30)

Protect budget and watch the right numbers.

Keep your top 5 campaigns in budget

If a top campaign runs out of budget at 2 PM, evening shoppers see someone else. A budget rule can add budget before that happens. For example, add 10% to 15% every hour when a campaign is hitting your ACOS target. Amazon’s own guidance describes schedule based and performance based budget rules and says schedule based rules can help during key shopping events. Give every rule a ceiling, so spend cannot run away. Our guide to Amazon ads overspend during BFCM shows how to set the ceilings.

Check before November 21:

  • A rule covers each of your top 5 campaigns.

  • Each rule fires before the budget runs out.

  • Each rule has a ceiling.

  • Alerts go to someone who will act on them.


Amazon dayparting for Black Friday: on or off?

If sales is your goal, turn dayparting off. Demand stays high all day during BFCM, and cutting hours hands those sales to competitors who stay on. The one exception is a limited budget in a high volume category, such as supplements. In that case, run aggressively in your best hours and pull back the rest of the day.

If profitability is your goal, dayparting works well. Raise bids and budgets in your peak hours. Lower them in other hours instead of pausing. Pick your peak hours from your own hourly data before the event starts. Our dayparting framework shows how.


Amazon Marketing Cloud audiences for BFCM

Amazon Marketing Cloud lets you build high intent audiences and use them in Sponsored Ads or DSP. Amazon says AMC users can create rule based or lookalike audiences for Sponsored Display targeting, or for bid boosts in Sponsored Products and Sponsored Brands.


AMC audience

Why it works during BFCM

Added to cart, did not buy (last 30 days)

Many of these shoppers are waiting for the deal. Bid slightly higher for them.

Viewed your product more than once

A strong consideration signal

Highly likely to shop

Amazon’s prebuilt audience, based on probability of conversion

Engaged with your video or DSP ads

Warmed up during your lead in

Keep lookback windows short, so the shoppers you target are still in the market. For more, see our guides to AMC for Black Friday and AMC custom audiences.


Monitor three numbers, and expect Amazon ads data delays

Spend, ACOS, clicks and sales can all report late on peak days. During Prime Day 2026, total sales data ran 4 to 5 hours behind. So focus on three numbers:

  • BSR: close to real time. Is your category rank holding as traffic peaks?

  • Search impression share: are you showing up on your top keywords?

  • Total sales: ads plus organic. Is the whole business growing?

Do not cut a campaign because of a number that has not caught up. Check again before you act, and tell your team early that delays are normal.

Amazon Ads After Black Friday (Dec 1 to 24): Keep the Momentum

Many sellers cut spend on December 1. Holiday shopping keeps going until December 24, and shoppers still buy with intent.


Action

How to do it

Keep budgets up

Lower than event week, but above your pre BFCM levels

Keep ranking campaigns live

Protect the rank you paid for on your top 5 keywords

Keep deals visible

Gift shoppers buy through mid December, so a smaller deal still helps

Retarget BFCM shoppers

Build a fixed Nov 1 to Dec 1 audience in AMC: viewers, cart adders and buyers. Reach them with Sponsored Display or DSP

Ask for reviews

Use Amazon’s Request a Review, 4 to 30 days after delivery, for every order placed Nov 1 to Dec 1

Daypart for peak days

Find your best converting days from last December and push harder on them


Build the BFCM audience once, then use it until December 24

Figure 4: Build the BFCM audience once, then use it until December 24.


Reviews matter beyond December. More reviews lift conversion going into January. The Request a Review button can only be used within 4 to 30 days of delivery, so even a Cyber Monday order cannot be asked for a review until at least four days after it is delivered. Use only Amazon’s review request or approved tools, and never offer anything in exchange for a review.

How Atom11 Helps With BFCM Amazon Ads

Atom11 Helps With BFCM Amazon Ads

Atom11 puts the BFCM toolkit in one place:

  • Budget automations that raise budgets on your top campaigns up to a ceiling you set, plus portfolio budget rules.

  • Dayparting based on your own hourly data.

  • Inventory automation that pauses ads when stock runs low and resumes them after restock, which covers the 15 day rule in Step 2.

  • Version control to save bids and budgets before the event and roll back afterward, with the Performance Monitor showing what each automation changed.

  • ASIN level reporting and AMC audiences you can use in your sponsored campaigns.

  • The Atom11 MCP, which connects Claude or any other AI agent to your Atom11 data, so you can ask audit questions in plain English.

Every week we release updates and new features to make advertising on Amazon easier. Subscribe to our newsletter to get them in your inbox.

Atom11 BFCM offer: 30% off your first month

New customers on the Pro or Enterprise plan, agencies included, can get a flat 30% off their first subscription month on Atom11’s analytics and automation software. The discount covers the first month, regular pricing applies afterward, and the offer can be claimed until December 31, 2026, with terms and conditions applying. If you want budget rules, dayparting and version control running before November 20, claim the Atom11 BFCM offer.

Common BFCM Mistakes on Amazon

  1. Raising bids 3 to 5 days before Black Friday instead of building campaigns from November 1.

  2. Giving your team a sales goal with an ACOS cap that quietly turns it into an ACOS goal.

  3. Checking stock for the event only, not for the weeks after it.

  4. Letting top campaigns run out of budget by early afternoon.

  5. Pausing campaigns during the event because of data that has not caught up.

  6. Switching off on December 1, while shoppers keep buying until December 24.

Conclusion

BFCM rewards preparation more than last minute spend. Set your goal, get retail ready and launch campaigns in the first week of November. Protect your budget and watch the right numbers during the event. Then keep selling, retargeting and collecting reviews until Christmas Eve.


Find where your growth is leaking

See the same signal-driven automation against your own catalog and accounts.

Find where your growth is leaking

See the same signal-driven automation against your own catalog and accounts.

FAQs

When should I start preparing my Amazon ads for Black Friday?

Start on November 1. Campaigns need about three weeks to build history before peak traffic arrives.

Should I raise my Amazon PPC bids for Black Friday?

Raise budgets and bids gradually through November, not in the final week. During the event, keeping your top campaigns in budget matters more than a higher bid.

Should I turn off dayparting during Black Friday and Cyber Monday?

If your goal is sales, yes, because shoppers buy around the clock. Keep it on only for a profitability goal, or a limited budget in a high volume category.

Why does my Amazon sales data look low during Black Friday?

Reporting can lag on peak days. During Prime Day 2026, total sales data ran 4 to 5 hours behind. Watch BSR and impression share, and check again before you change a campaign.

How much inventory do I need for Black Friday on Amazon?

Enough to last until December 24, not just through Cyber Monday. Add the units you expect before, during and after the event, using your own baseline and uplift. In our example, 20 units a day needs about 1,720 units.

TABLE OF CONTENTS

Book a demo

See how Atom11 keeps ACoS in check

automatically.

Book a demo →

Enterprise Amazon advertising software for brands and agencies across the US, UK, EU and LATAM.

Copyright © 2026 Atom11. All rights reserved.

Enterprise Amazon advertising software for brands and agencies across the US, UK, EU and LATAM.

Copyright © 2026 Atom11. All rights reserved.

Enterprise Amazon advertising software for brands and agencies across the US, UK, EU and LATAM.

Copyright © 2026 Atom11. All rights reserved.