Blog
/
How to Create a DVA+ Campaign: The Four Step Flow, With Limits and a Pre Launch Checklist
How to Create a DVA+ Campaign: The Four Step Flow, With Limits and a Pre Launch Checklist
Neha Bhuchar

Quick answer: You create a DVA+ campaign in Amazon Ads Agent in four steps: choose an objective, choose products or a brand URL, review the creative, then set a budget and flight dates and launch. Amazon says the flow is designed to take 15 minutes or less. In the automated flow you can advertise up to 20 products per campaign, and Amazon’s AI then handles targeting, bidding, inventory and format choice. DVA+ is still in closed beta in the US, so check that your account has access first.
Amazon is rolling DVA+ out in stages and updates its guide often, so confirm each screen against your own account.
What Are the Four Steps to Create a DVA+ Campaign?
The four steps are objective, products, creative and budget, and your choices in each step set what Amazon’s AI does with targeting, bidding and format allocation. Amazon’s campaign creation guide describes the flow, and the table shows what you decide and what Amazon decides at each step.
Step | What you choose | What Amazon’s AI does with it |
|---|---|---|
1. Objective | Sales, leads, subscriptions, traffic or awareness, depending on eligibility | Sets how bidding, targeting and format allocation work |
2. Products | ASINs from your catalog, or a landing page URL and conversion event for brands that do not sell on Amazon | Decides which audiences and placements fit those products |
3. Creative | Edit or replace the generated display, online video and streaming TV assets | Generates assets from your detail pages, brand store or website, and flags missing types |
4. Budget and launch | Daily, weekly, monthly or lifetime pacing and flight dates | Paces spend across formats and optimizes delivery |

Figure 1: The four steps, and who decides what.
One detail the summaries skip: the four steps are a simplification. The current support guide, as PPC Land reported, lists six screens in the form: objective, products, ads, an optional location step for off Amazon objectives, campaign settings and launch. If your screens do not match a four step description you read elsewhere, both can be right.
What Do You Need Before You Create a DVA+ Campaign?
You need an Amazon Ads Agent account, access to DVA+ in the US closed beta, products that are active and in stock, and creative inputs such as a product detail page, brand store or brand website that the AI can read. Preparing these first is what keeps the 15 minute flow at 15 minutes.
According to Amazon’s DVA+ page, eligible accounts are sellers, vendors and brands that do not sell on Amazon, and billing is by invoice only during closed beta. Use the sheet below before you open the builder.
Check before you start | Why it matters |
|---|---|
DVA+ shows in your Amazon Ads Agent account | Access is limited to participating US advertisers, so do not assume you have it |
Billing is arranged by invoice | Credit card billing is planned for Q1 2027, according to Amazon |
Every ASIN is active, in stock and has a complete detail page | Amazon notes that inactive or out of stock ASINs do not appear in conversion tracking |
Images, titles and brand store content are current | The creative is generated from these sources |
A conversion event is defined (brands that do not sell on Amazon) | The campaign needs something to optimize toward |
You know the flight length and total budget | Step 4 asks for both |
One person owns the settings log | You will want a record of every choice, as the API is not available yet |
Advanced settings are a separate request. Amazon’s guide says they are available to limited US advertisers and need a conversation with your account manager. Our guide to DVA+ simple mode vs advanced settings explains when each is worth it.
Which Objective Should You Choose When You Create a DVA+ Campaign?
Choose the objective that matches the one result you would pay for, because it shapes bidding, targeting and format allocation. For sellers and vendors that is usually sales, traffic or awareness on Amazon, and for brands that do not sell on Amazon it can also be leads or subscriptions.
Amazon’s guide lists sales, leads, subscriptions, traffic and awareness, and says DVA+ reviews your account history to recommend an objective and products that you approve or adjust. PPC Land reports that seven objectives exist in total and that you only see those your account is eligible for.
Objective | Best fit | Watch out for |
|---|---|---|
Sales | Products you want bought now, on or off Amazon | Attributed sales can overlap with Sponsored Ads, so check against your own order data |
Traffic | Driving detail page views for a launch | Traffic reports cost per detail page view, but you cannot set it as a target |
Awareness | Reach for a brand or a new product | Judge by new to brand and reach, not by ROAS |
Leads or subscriptions | Brands that do not sell on Amazon | Needs a landing page and a defined conversion event |
Can You Change the DVA+ Objective or KPI After You Launch?
You can, but it costs you. Amazon’s guide says you can change the KPI after launch, but this resets the campaign’s performance learnings. Treat the objective as a decision you make once, and decide it with the person who owns the result.
How Do You Choose Products in a DVA+ Campaign, and What Is the 20 Product Limit?
Add the products you want to advertise by searching for a name or ASIN, pasting an ASIN list or uploading a CSV template, up to 20 products per campaign in the automated flow. PPC Land reports that the guide was updated on November 13, 2026 to state this cap, and that it does not say how product variations count toward the 20.
Brands that do not sell on Amazon skip ASINs and give a landing page URL and a conversion event instead. DVA+ can also recommend products, which you can accept or replace.
Campaigns needed = Products you want to advertise ÷ 20, rounded up
Example. A catalog of 130 ASINs needs 130 ÷ 20 = 6.5, so 7 campaigns. That changes how you plan, because each campaign carries its own budget, flight and learning period.

Figure 2: Illustrative campaigns needed under the 20 product cap.
How Should You Group Products Into DVA+ Campaigns?
Group by objective and by economics, not by catalog order. Our suggestion, based on how the cap works: put products with similar margins and the same goal in one campaign, keep a hero product and its close variations together, and avoid mixing a launch product with a mature one, because a shared budget will favor whichever the AI finds easiest to convert. This is a judgment, not an Amazon rule, so test it on one group first.
How Does Creative Work in a DVA+ Campaign, and What Should You Review?
DVA+ generates display, online video and streaming TV creative from your product detail page, brand store or brand website, flags any missing asset types, and lets you edit each asset or upload your own. Review it before launch, because you are approving what Amazon’s AI built from your listings.
Amazon’s guide does not list creative dimensions, file formats or length limits, and points to its separate ad specs and policies pages. It also does not list audio among the default formats, although Amazon said audio would expand in Q4 2026.
Review item | What to look for |
|---|---|
Claims and prices | Nothing that contradicts the listing or promises something you cannot deliver |
Brand rules | Logo, colors and tone match your guidelines |
Missing assets | Any asset type DVA+ flagged as missing |
Product accuracy | The right product, variation and image in every format |
Policy | Amazon may apply content rating exclusions, dayparting or supply source exclusions and resubmit automatically if a campaign is rejected, so check what changed |
Our judgment: that last row is the one most guides skip. If Amazon resubmits a rejected campaign with exclusions you did not choose, delivery can differ from your plan, so read the campaign summary again after any rejection.
How Do You Set the Budget, Flight Dates and Pacing for a DVA+ Campaign?
Pick a pacing type, set flight dates of 14 days or longer, and set a total you can afford to spend even if the first week learns slowly. Amazon says flights of 14 days or longer give the optimization engine time to learn, and it states no minimum budget, so the floor is yours to set.
Amazon’s guide lists daily, weekly, monthly and lifetime pacing, while PPC Land’s reading of the support guide lists monthly, daily and lifetime, so see which options your screen offers. You can edit the budget while the campaign runs.
Lifetime budget = Daily budget × Flight days
Example (illustrative). A target cost per acquisition of $18 and a goal of about 50 conversions needs about $18 × 50 = $900. Over a 14 day flight that is about $64 a day, so a lifetime budget of $900. The 50 conversion target is a working rule of thumb for judging a test, not an Amazon requirement. A $20 daily budget over the same 14 days gives $280, which is unlikely to reach 50 conversions at that cost.
Advanced settings add budget caps by day or month. Amazon’s guide advises avoiding them unless you need a strict limit, because they can cause under delivery. Our guide to DVA, DVA+ and Full Funnel Campaigns covers how DVA+ differs from the Full Funnel type, which has its own $100 minimum daily budget.
What Happens When You Click Launch on a DVA+ Campaign?
You see a campaign summary to confirm your settings, and if the health score is critical or recommendations are unaddressed, you must acknowledge a warning before launch. PPC Land reports that launching does not activate the campaign, which stays inactive until you activate it, so check the status after you launch.
Two practical notes. If you use advanced settings, Amazon’s guide shows a health score and recommendations before launch, and a critical score is worth fixing and not clicking through. And because billing is by invoice during closed beta, tell your finance team before the first flight, not after.
What Can You Edit After You Launch a DVA+ Campaign?
You can edit budget, flight dates, products, creative and, for brands that do not sell on Amazon, location targeting, and you can pause or resume at any time. Amazon says every edit needs your explicit confirmation.
What you change | Effect |
|---|---|
Budget or flight dates | Allowed, with confirmation |
Products or creative | Allowed, with confirmation |
Pause or resume | Takes effect immediately |
KPI | Allowed, but it resets performance learnings |
Targeting, bidding, inventory | Not on the list in simple mode, and available with advanced settings |
Campaign name | Cannot be changed after the campaign ends, according to PPC Land |
Make one change at a time, and write it in your settings log with the date. That keeps a clean line between what you changed and what moved.
What Changes if You Create a DVA+ Campaign With Advanced Settings?
Advanced settings add manual audiences, bid strategies, publisher lists, deal activation, multiple ad groups and frequency caps, and the cap on products described above is reported not to apply in the same way. Frequency caps are reported as up to 3 per ad group, applied at the user or household level.
Because access is limited, most new advertisers will create their first DVA+ campaign in the default experience. The guide to simple mode vs advanced settings has a cost test for deciding when the extra control repays the extra work.
How Do You Check a New DVA+ Campaign in the First 14 Days?
Check status on day one, pacing around day three, delivery detail around day seven and results only after the flight and the attribution window have closed. Reading results too early is the common mistake, because the AI is still learning and attribution is still filling in.
When | What to check | What not to do |
|---|---|---|
Day 1 | The campaign is active, spend has started and the creative is approved | Do not change several settings at once |
Day 3 | Spend is pacing toward your daily figure | Do not judge ROAS yet |
Day 7 | Delivery by publisher, format and geography, which Amazon says DVA+ reports show | Do not cut a format on a few days of data |
End of flight | Spend, reach and sales against your plan | Do not read final results yet |
14 days after the flight | Attribution window has closed, so compare with your own order data | Do not skip the holdout comparison |
Amazon says you can connect Amazon Marketing Cloud for deeper audience and path to conversion analysis. Our guide to Amazon DSP attribution explains the windows and the metrics in DSP style reports.
What Is Still Unclear About Creating DVA+ Campaigns?
Amazon has not published DVA+ fees or minimum spend, how product variations count toward the 20 product cap, whether DVA+ campaigns can be edited in the Amazon DSP console, the 35 launch markets or dates for drafts and bulk management. Plan around these gaps and ask your account manager.
Open question | What Amazon has said so far |
|---|---|
Fees and minimum spend | Not stated, and Amazon says current DSP pricing carries forward |
Product variations and the 20 product cap | Not stated |
Audio in the default formats | Not listed in the guide, expansion described for Q4 2026 |
Drafts, bulk management and pre flight validation | Rolling out, no dates |
API access | Targeted for Q1 2027, so creation is manual for now |
Open beta | Expected in late October 2026, so check whether your account has it |
Because creation happens only in Amazon Ads Agent for now, our guide on managing DVA+ with the API or MCP explains what outside tools can and cannot do today.
Can Atom11 Help Before and After You Create a DVA+ Campaign?
Atom11 does not create DVA+ campaigns, because Amazon’s DVA+ API is a Q1 2027 target and creation happens in Amazon Ads Agent today. It can help around the campaign, through its Amazon DSP module for existing orders, unified Sponsored Ads and DSP reporting and Neo for comparing periods, and the Atom11 team can confirm how DVA+ data is handled.
How Does Atom11’s DSP Module Fit Around a New DVA+ Campaign?
Atom11 is an Amazon ads automation platform, and its Amazon DSP module covers jobs that stay useful whichever buying interface you use.
Job | How Atom11 handles it |
|---|---|
Existing DSP orders | Bulk creation of orders and ad groups, and pacing across orders toward one monthly budget |
Frequency | Caps set per audience |
Audiences | AMC reports and audience activation without SQL |
Reporting | DSP and Sponsored Ads side by side, with promoted, halo and combined metrics |
Analysis | Neo compares periods across more than 15 ad and retail signals |
Record | Version control and a Performance Monitor with a before and after record |
What Should You Ask Atom11 About DVA+ Before You Rely on It?
Ask which DVA+ data Atom11 can read today, when it expects to create or edit DVA+ campaigns after the API arrives, and how DVA+ spend appears next to your Sponsored Ads in unified reporting. Those answers are not published, so get them in writing.
Atom11 suits teams that want to own their decisions and keep changes explainable, and it is a weaker fit for anyone wanting a fully hands off autopilot. Atom11 DSP pricing starts at $499 a month for accounts spending under $50K and is 2% of ad spend above that, with Neo and the MCP included, and a managed service option is available. Check current terms on the pricing page, or book a demo and ask how it fits your DVA+ plans.
Conclusion
Creating a DVA+ campaign is quick, which is exactly why the decisions around it deserve care. The objective sets how Amazon’s AI behaves, the 20 product cap forces you to group your catalog, the creative is something you approve and not something you write, and a flight under 14 days gives the AI little time to learn.
Prepare the inputs, set the budget from a conversion target and not from a round number, change one thing at a time and write each choice in a settings log. Then judge the result only after the flight and the attribution window have closed, against your own order data and a holdout. Amazon has not answered several questions about fees and structure, so ask your account manager before you commit a large budget.
FAQs
How do I create a DVA+ campaign?
Open Amazon Ads Agent and follow four steps: choose an objective, choose products or a brand URL, review the generated creative, then set a budget and flight dates and launch. Amazon says the flow is designed to take 15 minutes or less, and DVA+ must be available on your account.
How many products can I add to a DVA+ campaign?
In the automated flow you can add up to 20 products per campaign, according to Amazon’s updated guide as reported by PPC Land. A larger catalog needs more than one campaign, and Amazon has not said how product variations count toward the limit.
What objectives can I choose for a DVA+ campaign?
Amazon’s guide lists sales, leads, subscriptions, traffic and awareness, and you see only the objectives your account is eligible for. Sellers and vendors mainly see sales, traffic and awareness on Amazon, while leads and subscriptions suit brands that do not sell on Amazon.
How long should a DVA+ flight be?
Amazon recommends flights of 14 days or longer so the optimization engine has time to learn. This is advice and not a stated minimum, and a short event flight is a poor fit for the default experience, so check whether advanced settings give you the pacing you need.
Can I change a DVA+ campaign after I launch it?
Yes, you can edit budget, flight dates, products and creative, and you can pause or resume at any time, with every edit needing your confirmation. Changing the KPI is allowed but resets the campaign’s performance learnings, so decide the objective before you launch.

